thegreenmonk
11-07-2009, 07:25 PM
Hello all,
My mate is having a bit of a problem with his computer atm. He just had to buy a new MB and CPU due to the old one overheating despite reapplication of heat paste and better cooling.
Now he put a ECS S42/661FX motherboard along with a P4 3.2ghz in addition to 2x 512mb RAM that he had previously. Everything else is the same but when it comes to boot - there is first a problem with boot order, then when booting to windows (Safe mode) it boots then stops at the AGP___.sys and a347bus.sys drivers then loops to start again.
The HD and windows was fine previously so am a little confused.
Thanks for any help
My mate is having a bit of a problem with his computer atm. He just had to buy a new MB and CPU due to the old one overheating despite reapplication of heat paste and better cooling.
Now he put a ECS S42/661FX motherboard along with a P4 3.2ghz in addition to 2x 512mb RAM that he had previously. Everything else is the same but when it comes to boot - there is first a problem with boot order, then when booting to windows (Safe mode) it boots then stops at the AGP___.sys and a347bus.sys drivers then loops to start again.
The HD and windows was fine previously so am a little confused.
Thanks for any help