PDA

View Full Version : Blurry Display or Unlear fonts



mattk
20-01-2006, 08:22 AM
This is down to the display configuration on the notebook. All of our current products as of 01-01-06 have a widescreen display. The Resolution supported by these is either 1280x960 or 1280x800 depending on the size of the screen. Chances are that it is set to either 800x600 or 1024x768, this is why it looks blurry.

To Change these settings either right click on the desktop and select properties or go into control panel and open display properties.

There should be 5 Tabs avialable at the top, Themes, Desktop, Screen Saver, Appearance and Settings. Were intrested in tab 5 (Settings)

There should be a slide bar labeled Screen Resolution. Slide this to the right until the resolution is set to an appropriate setting noted in the begining of this post.

If this option is unavailable you will have to reinstall the VGA driver from the drivers cd supplied with your notebook.

After installing the VGA driver reboot the notebook and start from the begining of this post.