novatech digital video camera

[crookhoward]

very recently purchased the novatech video camera and despite the
awful manual have managed to connect the camera with the pc.
however the following have occured.
1 when opening the tft, the camera does not switch on, but pressing the power button does.
2 when set to pc mass storage , connecting the computer turns off
the camera. is this normal?
video impressions will open audio and photos but not video.
when trying to open video only the audio box can be ticked.

[G-Man]

Have you tried the new drivers on the Nov-368 at the top of this disscussion area? If so I will check it out further for you.

[crookhoward]

yes i have down loaded the driversfrom novatech

[crookhoward]

further to my post of 06/07 & 07/07 i still cannot connect camera to computer after downloading new drivers. when in device manager,
imaging devices, coach camera, it says this device cannot start [code 10]
under drivers it lists c\windows\system 32\DRIVER\coach vc system
and about 12 drivers.
is there something wrong with the camera. it does not start when the tft is opened, requirering the power button pushed. it switches off when the
computer is connected, with camera set to pc mass storage.
pressing the power button usually restarts the camera. should the camera be on or off. i have tried both but cannot connect between
camera and computer.
thank you

[G-Man]

Please contact our Tech support department and we can discuss further the issue you have raised.


:)

[Digger]

I need the drivers for this but cant find them on the site, windows 7 is asking for drivers for it.

can you please give me the link for it.