Fitting Question

[EnGLsh KiD MoFo]

Yeah i recenly built my pc and brought alot of products from novatech.
and i wanted to install watercooling this "ThermalTake Big Water SE" Kit (http://www.novatech.co.uk/novatech/specpage.html?tt-bigwse&P=2)
i was wondering would this be compatable and if not what kit would. and colling gel on the cpu would this have to be removed or a new applyed?

Pc Info
i have an amd athlon 62 3200+ 939pin
and msi rs480m2 "Website Info (http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=639)

Manythanks

[Taxation]

yes it will
just make sure there is enough room for the rad and pump in the case
(motherboard will need to be removed for installation)

[EnGLsh KiD MoFo]

ok thanks for you help

[EnGLsh KiD MoFo]

but i would i requre a reaply of thermal gel/pad?

and how do you go about removing the old?

[Taxation]

You will need to remove the old thermal paste before applying the new paste
You can get it off with rubbing alcohol or nail polish remover (put liquid onto tissue/kitchen towel, and rub on cpu, i did it when the cpu was still installed so i wouldnt bend any of the pins)
You get new thermal paste with the kit that you re-apply (put a pea size amount on the cpu , spreading is optional, then clamp down the cpu block and that will spread it evenly)

[EnGLsh KiD MoFo]

thanks alot buddy realy apricate it

[Taxation]

if you need any more help , dont be afraid to ask :D

[EnGLsh KiD MoFo]

1 more question did you say there was cpu paste in the watercooling kit if not im gona order some with the kit today?

[Taxation]

the kit comes with thermal paste supplied
you wont need to buy any seperately