problem

[EnGLsh KiD MoFo]

hey i recnely installed a water kit. and moved from one case to the other.
but when i turn the pc on the mother board images loads but the bios dosent.
ive try everythink upluggin hardware and pluggin back in.
unpluugin the battery
but i dont know what to do

any ideas?

[EnGLsh KiD MoFo]

i just tryed my old psu 450 watt but that didnt work eiter, im useing a 600 watt in the pc atm

and the keybaord isnrt responcive nor lights up.

i mwas thinking could this be a reason that i didnt connect up all the case little connectors. imean there is loads and i was unsure. i cannected so i just turns on so this might be the problem?

many thanks

[Nox]

plug the old cpu fan onto fan1 connector on the motheboard (or whichever it was connected to before) then see if it boots.

Nox

[EnGLsh KiD MoFo]

hey buddy i juse edited above this coulnt be a reason coul it?>

and thanks for you help but i removed the reating click thing which the fan could clip on. could the water cooling stop this booting

[Taxation]

fin a 3 pin fan and plug it into the cpu fan header, because some motherboards require a cpu fan to be plugged in

[EnGLsh KiD MoFo]

yeah i plugged the fan into both 3pins and still it wont load

[Taxation]

are all the power cables connected properly?
is the cpu installed properly?
did any water go onto the motherboard when installing the system?
is there a smell coming from your motherboard ie.burning?
Does the pump turn on when you turn the computer on?

[EnGLsh KiD MoFo]

all the powercables are connected.
the pump works
the cooling system is fully functional.
not all of the little connectors from the case are added.
ice unpluged most of the hardware aslo and replugged?
there isnt any smell