SATA drive instalation with WIN2000

[Adrian Jessup]

Hi I am currently trying to setup a SATA drive with win2000 I cannot get the BIOS to see this drive as primary master.

When I boot from MAXBLAST the SATA drive is not listed on the first page but on the second page as un listed (or something like that)

I have been told I need to reset my BIOS but no idea how!

Please help, please keep it as un technical as possible

Best regards

Adrian

[Nox]

Restting your BIOS means one of the following: finding the 'load deafults' option, it could be called load fail safe default, loads optimised defaults, or similar. OR... Clearing the CMOS, will have pretty much the same effect.

Nox

[anthonygriff]

When you're in the bios check to see if there is a setting or option for enabling the sata connections.

This setting is usually set to disabled, so resetting your bios may not help.